PROJECT ONE: Sketch idea

For this contraption, I was inspired by a variety of arcade games and wanted to combine the ideas into one. I was inspired by Plinko, Pachinko machines and an arcade game called Monster Drop.




Initial Sketch


Digital Drawing




Comments

Post a Comment

Popular posts from this blog

PROJECT 1 (2.0!) : LOCK BOX (For 3/26/19)

Image
I expanded upon my original idea to create the LOCK BOX. The goal is for the user to figure out the button path they must take in order to enter the correct password. Then the box opens for a surprise! The trick to this box, however, is that the button paths change after each successful box open. I have coded a total of 16 button paths, where one is chosen randomly after each successful open. The code allows the user to continue playing in a loop, and the trick to the challenge is a good memory. Here is a video of me playing with LOCK BOX: Here are some pictures: Here is the very long code for LOCK BOX: #include <Servo.h> Servo myservo; const int led1 = 8; const int led2 = 9; const int led3 = 10; const int led4 = 11; const int but1 = 6; const int but2 = 2; const int but3 = 3; const int but4 = 4; int randchoice; int butt1 = 0;        int butt2 = 0; int butt3 = 0; int butt4 = 0; int lbutt1 = 0; int lbutt2=0; int lbutt3=0; ...
Read more

Project one observations

 Project One Observations The main observation about my project is that it is difficult to get people to use LOCKBOX in the first place. The aesthetics of my design suffered due to time constraints and limited access to resources. A lot of people glaze over my project and walk away. It is incredibly difficult to create a design that people want to use for a variety of reasons. First of all, Working with a 6 and a half inch long breadboard makes it difficult to slim down down the size of my device. Second of all, plug in wires is not useful for the fact that they will fall out if not placed correctly. They also stick up a couple of inches, so this also creates size constraints. Third, the Arduino itself is finicky, has to be powered through the wall or my laptop, because I do not have the parts to convert to a 9V battery. To make it worse, the servo has to be placed at the opening of the box, so it is virtually impossible to hide. If you hide the servo, the box wouldn’t be abl...
Read more